Welcome to Solar Quest Ai: Our Work and Our Standard

Solar Quest Ai is a local rooftop solar installer that designs, permits, and mounts photovoltaic systems for homes and small businesses in our service area. Founded in 2019 on Maple Street, we handle everything from shade analysis to inverter commissioning. Our standard: every array we build must hit at least 92% of its modeled first-year yield, in writing.

What does Solar Quest Ai actually do?

We install grid-tied rooftop solar. That means panels, racking, inverters, monitoring, and the paperwork nobody wants to touch. A typical residential job at Solar Quest Ai runs 6-9 kW, priced between $14,000 and $22,000 before incentives, and takes two days on the roof plus about four weeks of permitting and utility interconnection.

We don't sell batteries to everyone who asks. That's the contradiction most solar companies won't say out loud. Batteries make sense when you have frequent outages or a punishing time-of-use rate. For a flat-rate customer on a stable grid, a battery adds $10k+ and rarely pays back inside its warranty window. Ask about the payback math before you buy the hardware.

Last March, a homeowner named Priya on Elm Avenue called us after a competitor quoted her a 12 kW system for a 1,400 sq ft ranch. Her actual annual usage was 6,800 kWh. We modeled her roof, accounted for the oak on her south side, and installed 7.2 kW. She's now offsetting 96% of her bill. The oversized quote would've wasted about $9,000 with no extra benefit, because net metering in our territory doesn't pay retail for surplus.

Curious how we vet the details before quoting? Read our guide on questions worth asking any solar contractor before you sign anything.

How do we hold our installation standard?

Every job passes a five-point internal audit before we invoice. No exceptions, no "we'll come back next week."

• We torque every lag bolt to manufacturer spec and photograph the torque wrench reading for the job file.
• We flash every roof penetration with a compatible boot and butyl sealant, then thermal-image the attic that evening.
• We label every conductor at both ends per NEC 690 requirements, so the next electrician on your roof isn't guessing [1].
• We commission each inverter with the installer app, save the report, and email you a PDF copy the same day.
• We register the panel and inverter warranties in your name within 48 hours of energization.
• We schedule a 30-day performance check to compare actual output against the PVWatts model we quoted from [2].

That last step is where most installers vanish. We stay. If a string is underproducing by more than 8%, we're back on the roof at our cost.

What should you expect on price and timeline?

Here's a straight comparison of the three system tiers we quote most often. Prices are pre-incentive and include permitting.

| System size | Typical cost | Best for | Install time |

|---|---|---|---|

| 4-6 kW | $10,000-$15,000 | Small homes, low usage under 5,000 kWh/yr | 1 day |

| 6-9 kW | $14,000-$22,000 | Average family home, 6,000-10,000 kWh/yr | 2 days |

| 9-12 kW | $21,000-$29,000 | Large homes, EV charging, heat pumps | 2-3 days |

The federal residential clean energy credit currently returns 30% of system cost as a tax credit through 2032 [3]. We include the paperwork in every closing packet. Want to see how we approach a job start to finish? Take a look behind the work at Solar Quest Ai.

Why does our standard matter for your roof?

Because a bad solar install can void your roof warranty and leak for years before anyone notices. Try this: after any installer finishes, go into your attic on a sunny afternoon and look up at the panel attachment points. You should see zero daylight. If you see pinholes, that roof will fail.

We carry $2M in liability and every installer on our crew holds a NABCEP PV Installation Professional credential. Roofing warranty preserved. Electrical work permitted. That's the floor, not the ceiling.

FAQ

Do you service my area?

We cover a 40-mile radius from our shop on Maple Street. If you're outside that, call us anyway. We'll either refer you to a vetted installer we trust or, for jobs over 15 kW, we sometimes travel further. Site visits inside our core zone are free and take about 45 minutes.

How long does the full process take?

From signed contract to power flowing: typically 6-10 weeks. Roof install itself is one to three days. The rest is engineering stamps, city permits, and utility interconnection approval. We handle every filing. You approve the design, we do the chasing.

What warranty do you offer?

Panels carry a 25-year manufacturer performance warranty. Microinverters carry 25 years. Our workmanship warranty is 10 years and covers any roof penetration we made, any wire we ran, and any labor to swap a failed component. Written, transferable, and filed with your closing documents.

What if my production is lower than promised?

We guarantee at least 92% of the modeled first-year kWh. If you fall short, we diagnose the cause at no charge and fix anything within our control: shading changes, string faults, inverter tuning. If a panel is defective, we file the manufacturer claim and handle the swap.